Special glove box for corrosion resistance industr

Product Description

Product introduction

In the process of scientific experiment, some substances are easy to be oxidized and deliquescent in the atmosphere, which makes the chemical reaction of the Test Substances and the pretreatment of the samples very difficult, affecting the process of experiment and test results. The vacuum glove box (also called the vacuum inert gas operating box) effectively solves the problems of easy oxidation and deliquescence, and the device can make the test sample can be put in and taken out safely, and in the anaerobic anhydrous state of the free operation, reaction and testing to ensure the normal conduct of scientific experiments.

Primary use

Laboratory work on low-energy radioactive substances, aseptic and chemical procedures for microbial inoculation, and Quantitative analysis of chemical substances can be carried out in the operating box. Biochemical, metallurgical, electronic, chemical, geological, mineral, pharmaceutical, magnetic materials, equipment batteries, bio-cultivation, food packaging, battery materials and other processes in a protective atmosphere. The product is an ideal device for scientific experiments in universities, scientific research units and enterprise laboratories.

Main features

Stainless steel structure, corrosion resistance, easy to clean, pollution-free;

The viewing angle of the viewing window is broad, clear and bright;

The box is equipped with a multi-hole socket, convenient for scientific testing;

Select the configuration

Can choose the vacuum pump, bracket, can also be customized

Glove box performance
Serial number	Part name	Brand/structure/materials, etc.	Features
1	Box body material	304 stainless steel	Good sealing
2	Box structure		To ensure that the pumping vacuum is not pumping deformation
3	Observation window	Plate thickness of 12mm	Wide, clear and bright view
4	Glove box cavity	Stainless steel construction	Corrosion resistance, easy cleaning, no pollution, scratch resistance.
5	Configuration	Multi-hole socket	To facilitate scientific experiments
6	Optional devices	Vacuum Pump, bracket	Can also be customized
7	Gloves	Rubber Gloves	The Operation Glove adopts the special sealing rubber glove, the sealing is reliable. Gloves of different materials, such as latex, rubber and butyl, can be changed according to the needs of the experiment.
8	Supporting	Gloves,power supply,inlet and outlet valves,LEDlights, trachea	Are already installed in the equipment, do not need to install their own, as long as the delivery of the trachea pipeline can be connected.
9	Operation Box	Vacuum	Zero. 1MPA, vacuum drop in 12 hours & LT; 0.005 mpa.

The transition hatch

The interior of the transition room is made, flat

It is convenient to store material, adopt air rod balance lifting mechanism, and open the door vertically.

Humidity

Box, filter bin

After vacuum replacement of inert gas can achieve less than 1% of the humidity, when repeated vacuum replacement, the internal humidity will be lower.

Glove box

Operation

The whole easy to operate, 5 minutes can be pumped clean box, purification, replacement gas time 5 ~ 10 minutes.